• Pipeline products are manufactured in sizes ranging from 2” – 12”
  • Pressure capabilities up to 3500psi, depending on size and temperatures up to 100 °C/212°F
  • Used to transport highly corrosive produced water and CO2 gas
  • Used in lower to medium pressure oil and gas flow lines where corrosive flow is encountered
  • Available resin systems are anhydride, aliphatic amine and aromatic amine cured epoxy, with each providing slightly different chemical and temperature resistance
  • Fiberglass reinforcement provides the structural strength
  • Manufactured to a minimum design life of 20 years at rated temperature and pressure according to the ASTM D2992 Procedure B and industry standards, such as API 15HR


  • Flow / Emulsion lines  
  • Injection / Disposal lines 
  • Group lines 
  • Gas gathering & transport lines 
  • De-watering lines
  • Water/Frac water transfer lines


  • Corrosion Control
  • Reduced Installation Costs
  • Improved Flow Efficiency
  • Reduced Paraffin & Scale Build-Up
  • Reduced Maintenance Cost
  • Environmentally Friendly Option

Oilfield Chemical Resistance Guide

TS&M Pipeline Questionnaire

STAR™ Super Seal SP/SPH/SS/SS-HP API Design (Anhydride, Aliphatic, Amine & Aromatic Amine)

Product Description

  • Sizes - 2 through 12 inches
  • Pressure - Up to 3,000 psi (20.7 MPa)
  • Temperatures up to 212°F/100°C
  • Anhydride Resin System = up to 150°F (65.6°C) Max.
  • Aliphatic Amine Resin System= up to 200°F (93.3°C) Max.
  • Aromatic Amine Resin System = up to 212°F (100°C) Max.
  • Reinforcement - Premium Fiberglass
  • Joining Systems - O-ring / 4rd and 2rd connections
  • Joint Length - 30-37 feet (9-11 mts) nominal
  • Fittings - A variety of filament wound threaded fittings are available in 4rd and 2rd connections